We realized that most mechanically minded people have a cordless drill. So we designed the motorcycle loader to work using a cordless drill.

No effort, no need for special installations or batteries, no need to drill holes, or draw cables.

It should be a cordless tool using 18 or 24V, with an output of 50Nm.

In an emergency, the motorcycle loaders can be operated by hand using a standard 19mm wrench (3/4"). The same size like most wheel bolts.

The AUN 200 motorcycle loader will lift bikes into pick-up trucks with a load height of 900mm or 35".

If you have a crew cab pick-up truck like a Jeep Gladiator for example (with a short cargo bed) we can then cut the base ramp to suit your exact cargo bed plus tailgate length.

If on the other hand you have a long bed pick-up truck, you could use the AUN200 motorcycle loader together with the AC 004 tailgate adapter so that you can close the tailgate after loading the bike.

By approximately 85 mm. However if straps are used to compress the front struts of the motorcycle, the height rise is zero, or negative. For example if the client compresses the front struts 100mm, then the motorcycle can be loaded in a space 15mm lower than its original height.

If you wish to use our motorcycle loaders for your towing business, this does not pose any problem, however we advise to download our Maintenance Guide PDF, which you can find on our MOTORCYCLE LOADERS page, for weekly and monthly maintenance to keep the worm drive and lifting mechanism working as smoothly as possible.